ZR51 Performance

    [Home Icon]

ZF S6-40 Shifter Options:  1990-1994 ZR-1 and 1989-1994 baseline manual 6-speed Corvette are equipped with lift-ring shifter. The lift-ring type shifter has an external reverse lock-out mechanism physically disallowing entry into reverse gear neutral gate until the lift-ring is pulled upwards. Due to the fact that the ZF S6-40 reverse gear is fully synchronized and that it is possible to engage reverse gear at 80 mph… just one time, it is advised that the reverse gear select lockout feature not be defeated.  Typical reverse gear repair cost is $1300 with labor and shipping included.    1995 ZR-1 and 1995-1996 baseline manual ZF 6-speed Corvette are equipped with crash-thru shifter. The crash-thru type shifter requires additional force while shift lever travels rightward through reverse neutral gate giving a tactile feedback warning to the operator that reverse gear is about to be engaged.

C4 Corvette ZF Modified Gear Shift Levers -  Are made from OEM gear shift levers, retain the original damper feature and can be purchased through our Modified Gear Shift Lever Core Exchange Program.  Modification to either type gear shift lever entails removing 1.100 inch from above the fulcrum (pivot) point and adding 0.562 inch below the fulcrum point. The component segments are held together using a custom precision alignment jig during weld assembly process to ensure optimal performance during operation. Additional guide piece shims and flange bolt are included with each modified gear shift lever. 

Lift-Ring Short Throw Shifter ($250.00) - For 1989-1994 Corvette ZF 6-speed. Include modified draw bar and stop bolt so that the lift ring (GM P/N 10076757) need only be transferred from original to new lift-ring shifter when installing. Additional guide piece shims and flange bolt included. The original lift ring shift lever core must include the original draw bar and stop bolt when returning the core to us.  $150.00 Core charge is applicable unless prior arrangement to send in original shift lever pending installation, is agreed upon.

Crash-Thru Short Throw Shifter ($185.00) - For 1995-96 Corvette ZF 6-speed or when updating earlier S6-40 shift shaft P/N 1052206028 with P/N 1052206045. Additional guide piece shims and flange bolt included.  $100.00 Core charge is applicable unless prior arrangement to send in original shift lever pending installation, is agreed upon.

Custom Lift-Ring Short Throw Shifter ($450.00) For S6-40 Retrofit with 1964-1967 Shift Lever Appearance.

 

 

    [Home Icon]

Send email to billb@zfdoc.com or call Bill Boudreau at (602) 319-6575.
Last modified: November 5, 2013